Organized by:

10-12 March 2027  Rimini Expo Centre, Italy
chevron_left chevron_right

Search

Energy storage beyond lithium: Technologies that can go where LFP cannot

Energy storage beyond lithium: Technologies that can go where LFP cannot

From compressed air to flow batteries and emerging battery chemistires, a comparison of technologies designed for the post-litium era.

In 2025, 108 GW of new battery storage capacity came online worldwide, up 40% from the previous year and 11 times the volume installed in 2021, according to the International Energy Agency. Approximately 90% of this capacity uses lithium iron phosphate (LFP) chemistry, a technology that accounted for well under half of installations just five years ago.

The most common discharge duration remains around two hours, although an increasing number of projects can deliver electricity for four hours or longer.

This configuration works well for shifting electricity supply throughout the day and providing grid-balancing services. But it leaves a growing challenge unresolved as wind and solar capacity expands: intermittent generation, prolonged weather disruptions and grid congestion that force operators to curtail renewable electricity that is already available.

According to estimates developed by McKinsey & Company in collaboration with the Long Duration Energy Storage Council (LDES Council), between 80 and 140 TWh of long-duration energy storage capacity will be needed to achieve net-zero emissions in the energy sector by 2040.

Technologies that either eliminate lithium or use it differently could help bridge that gap. Each offers distinct advantages and limitations.


Electrochemical energy storage

LFP batteries have become dominant because of their combination of low cost and long cycle life. Technology maturity assessments put cell costs at approximately €40 to €60 per kWh, with lifespans ranging from 2,000 to 8,000 cycles depending on the product. That sets a demanding benchmark for competing technologies.

Sodium-ion batteries using Prussian white chemistry, for example, cost around €85 per kWh and offer approximately 5,000 cycles, meaning they have yet to establish a price advantage.

However, they eliminate the need for lithium. Sodium-ion batteries using polyanion-based chemistries also offer a claimed lifespan of 10,000 cycles and can deliver 90% of their rated power at temperatures as low as -40°C.

For long-duration storage, however, the benchmark is different: pumped-storage hydropower.

According to a recent study by Politecnico di Milano, pumped hydro accounts for approximately 94% of installed electricity storage capacity worldwide.

Its round-trip efficiency ranges from 70% to 85%, and its cost per kWh is among the lowest in the category. But the technology requires substantial upfront investment, lengthy construction periods and locations with suitable topography.

Which mechanical and thermal storage alternatives could overcome some of these limitations?


Alternatives for long-duration energy storage

The LDES Council defines long-duration energy storage as systems capable of discharging electricity for at least eight hours, potentially extending to days, weeks or entire seasons. Politecnico di Milano places the threshold at eight to 10 hours.

Among these technologies, compressed air energy storage (CAES) has the longest history.

The technology uses surplus electricity to compress air into underground caverns or storage vessels. When electricity is needed, the compressed air is released through expansion turbines to generate power.

Early commercial plants use a diabatic configuration, which burns fuel during discharge. More recent designs, including adiabatic, isothermal and supercritical systems, seek to recover heat generated during compression and reduce dependence on fuel.

Geological constraints remain a major limitation because suitable underground formations are required. Round-trip efficiency ranges from 40% to 70%, depending on the configuration, with adiabatic systems achieving approximately 65%.

Liquid air energy storage (LAES) removes the need for underground caverns. Air is liquefied, stored at low pressure in insulated tanks and vaporized when electricity is needed.

However, reported efficiency figures vary considerably. Politecnico di Milano cites 55%, while the LDES Council estimates 60% to 75%. The difference largely depends on how effectively the system recovers and reuses heat and cold.

Another technology in the broader family of long-duration thermomechanical storage systems is the CO₂ battery.

This approach takes advantage of carbon dioxide's ability to liquefy at room temperature when pressurized. The CO₂ can therefore be stored in conventional tanks without requiring cryogenic temperatures.

Heat generated during compression is captured in a thermal storage system and reused during discharge.

Developers claim the technology can achieve 75% round-trip efficiency, discharge durations of eight to 24 hours and a service life exceeding 30 years without capacity degradation. For a 10-hour storage application, its cost is estimated at roughly half that of lithium-based systems.



This article was realized in collaboration with Rinnovabili.

PUBLICATION

09/11/2026

Other related news

Europe's battery storage market surges as Italy's growth stalls

09/11/2026

Europe's battery storage market surges as Italy's growth stalls

FIND MORE arrow_forward

Agrivoltaic suitable areas in Italy, a fast-evolving regulatory framework

04/09/2026

Agrivoltaic suitable areas in Italy, a fast-evolving regulatory framework

FIND MORE arrow_forward

Electric cars, record sales in Europe: boom driven by lower prices and rising fuel costs

05/10/2026

Electric cars, record sales in Europe: boom driven by lower prices and rising fuel costs

FIND MORE arrow_forward

Electric company fleets and electric cars: why Italy is lagging behind Europe and what it needs to catch up

05/10/2026

Electric company fleets and electric cars: why Italy is lagging behind Europe and what it needs to catch up

FIND MORE arrow_forward

Solar photovoltaic capacity worldwide surpasses 2.2 TW in 2024

13/06/2025

Solar photovoltaic capacity worldwide surpasses 2.2 TW in 2024

FIND MORE arrow_forward

13/10/2026

Photovoltaics, Energy Storage, and Mobility: Ingeteam's Vision for the Grid of the Future

FIND MORE arrow_forward

15/09/2026

Back Contact solar technology enters a new era as tandem cells push efficiency limits

FIND MORE arrow_forward

Photovoltaics module technology accelerates beyond 25% efficiency

04/09/2026

Photovoltaics module technology accelerates beyond 25% efficiency

FIND MORE arrow_forward

The contribution of renewables to the climate fight

26/08/2025

The contribution of renewables to the climate fight

FIND MORE arrow_forward

European PPA Market: challenges and opportunities

29/10/2025

European PPA Market: challenges and opportunities

FIND MORE arrow_forward

arrow_back
arrow_forward